香蕉派BPI-M1+ Raspbian系统安装，启动顺利！！！

sky-Hawk where · 发表于 2015-7-18 00:34:20

本帖最后由 zhzhx66 于 2015-7-18 00:31 编辑

官网下载镜像
http://www.bananapi.com/index.php/download?layout=edit&id=29

百度云：http://pan.baidu.com/s/1kTrCO1x

压缩包解压后得到镜像：2015-01-31-raspbian-bpi-r1.img

安装SD卡格式化工具SDFormatterv4，请下载附件

SDFormatterv4.zip (6 MB, 下载次数: 19)

2015-7-18 00:06 上传

点击文件名下载附件
打开SDFormatterv4

最后点击格式化，等待完成。
用Win32 Diskimager 制作启动卡，Win32 Diskimager 下载找度娘吧
打开 Win32 Diskimager ，在Image file中打开镜像，在device选中SD卡，最后点击write

将制作好的SD卡插入BPI-M1+卡槽,上电即可启动。

通过banana pi的UART口来查看启动信息

U-Boot SPL 2015.01-03355-g4e7c892-dirty (Feb 08 2015 - 08:36:40)
DRAM: 1024 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2

U-Boot 2015.01-03355-g4e7c892-dirty (Feb 08 2015 - 08:36:40) Allwinner Technology

CPU: Allwinner A20 (SUN7I)
I2C: ready
DRAM:  1015 MiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

Reserved 9216kB of RAM for Framebuffer.
HDMI connected: Setting up a 1440x900 hdmi console
In: serial
Out: vga
Err: vga
SCSI:  SUNXI SCSI INIT
SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net:
dwmac.1c50000
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices...
1 USB Device(s) found
USB1: USB EHCI 1.00
scanning bus 1 for devices...
1 USB Device(s) found
   scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  2
1
0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0...
Found U-Boot script /boot.scr
reading /boot.scr
298 bytes read in 36 ms (7.8 KiB/s)
## Executing script at 43100000
reading uImage
4752384 bytes read in 245 ms (18.5 MiB/s)
reading dtb
24098 bytes read in 244 ms (95.7 KiB/s)
## Booting kernel from Legacy Image at 46000000 ...
Image Name: Linux-3.19.0-rc5bpi
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4752320 Bytes = 4.5 MiB
Load Address: 40008000
Entry Point:  40008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 49000000
Booting using the fdt blob at 0x49000000
Loading Kernel Image ... OK
Using Device Tree in place at 49000000, end 49008e21

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-rc5bpi (pi@raspberrypi) (gcc version 4.6.3 (Debian 4.6.3-14+rpi1) ) #1 SMP Sun Feb 8 09:58:58 UTC 2015
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: BPI-R1
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] PERCPU: Embedded 10 pages/cpu @eeee0000 s8448 r8192 d24320 u40960
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258130
[ 0.000000] Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rw rootwait panic=10
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1019484K/1039360K available (5921K kernel code, 578K rwdata, 2412K rodata, 508K init, 281K bss, 19876K reserved, 0K cma-reserved, 261120K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000]    vector  : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000]    fixmap  : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000]    vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000]    lowmem  : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000]    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000]    modules : 0xbf000000 - 0xbfe00000 (  14 MB)
[ 0.000000]    .text : 0xc0208000 - 0xc0a2c6c4 (8338 kB)
[ 0.000000]    .init : 0xc0a2d000 - 0xc0aac000 ( 508 kB)
[ 0.000000]    .data : 0xc0aac000 - 0xc0b3cba0 ( 579 kB)
[ 0.000000]       .bss : 0xc0b3cba0 - 0xc0b832c0 ( 282 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[ 0.000020] Switching to timer-based delay loop, resolution 41ns
[ 0.000882] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[ 0.001193] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
[ 0.001440] Console: colour dummy device 80x30
[ 0.001857] console [tty1] enabled
[ 0.001889] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.001917] pid_max: default: 32768 minimum: 301
[ 0.002040] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002060] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002801] Initializing cgroup subsys memory
[ 0.002861] Initializing cgroup subsys devices
[ 0.002883] Initializing cgroup subsys freezer
[ 0.002902] Initializing cgroup subsys net_cls
[ 0.002923] Initializing cgroup subsys blkio
[ 0.002940] Initializing cgroup subsys perf_event
[ 0.002960] Initializing cgroup subsys net_prio
[ 0.003012] CPU: Testing write buffer coherency: ok
[ 0.003348] /cpus/cpu@0 missing clock-frequency property
[ 0.003381] /cpus/cpu@1 missing clock-frequency property
[ 0.003401] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.003612] Setting up static identity map for 0x4079c370 - 0x4079c3c8
[ 0.006890] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.006989] Brought up 2 CPUs
[ 0.007035] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.007049] CPU: All CPU(s) started in HYP mode.
[ 0.007061] CPU: Virtualization extensions available.
[ 0.007766] devtmpfs: initialized
[ 0.008715] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.009303] pinctrl core: initialized pinctrl subsystem
[ 0.015586] NET: Registered protocol family 16
[ 0.015999] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.023425] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.023469] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.061738] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
[ 0.061799] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
[ 0.061842] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[ 0.061871] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.061906] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[ 0.061934] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.062666] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe
[ 0.062705] platform gmac-3v3: Driver reg-fixed-voltage requests probe deferral
[ 0.063268] SCSI subsystem initialized
[ 0.063910] usbcore: registered new interface driver usbfs
[ 0.063998] usbcore: registered new interface driver hub
[ 0.064089] usbcore: registered new device driver usb
[ 0.064522] pps_core: LinuxPPS API ver. 1 registered
[ 0.064544] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.064597] PTP clock support registered
[ 0.066214] cfg80211: Calling CRDA to update world regulatory domain
[ 0.066498] Switched to clocksource arch_sys_counter
[ 0.066908] FS-Cache: Loaded
[ 0.067245] CacheFiles: Loaded
[ 0.068017] simple-framebuffer 7f700000.framebuffer: framebuffer at 0x7f700000, 0x4f1a00 bytes, mapped to 0xf0800000
[ 0.068057] simple-framebuffer 7f700000.framebuffer: format=x8r8g8b8, mode=1440x900x32, linelength=5760
[ 0.091314] Console: switching to colour frame buffer device 180x56
[ 0.112295] simple-framebuffer 7f700000.framebuffer: fb0: simplefb registered!
[ 0.122131] NET: Registered protocol family 2
[ 0.123060] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.123354] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.123655] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.123934] TCP: reno registered
[ 0.124045] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.124272] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.124747] NET: Registered protocol family 1
[ 0.125300] RPC: Registered named UNIX socket transport module.
[ 0.125491] RPC: Registered udp transport module.
[ 0.125629] RPC: Registered tcp transport module.
[ 0.125767] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.126911] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.128568] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.138290] VFS: Disk quotas dquot_6.5.2
[ 0.138692] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.140411] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.141798] NFS: Registering the id_resolver key type
[ 0.142027] Key type id_resolver registered
[ 0.142153] Key type id_legacy registered
[ 0.149534] fuse init (API version 7.23)
[ 0.158563] bounce: pool size: 64 pages
[ 0.165414] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.172262] io scheduler noop registered
[ 0.179001] io scheduler deadline registered
[ 0.185628] io scheduler cfq registered (default)
[ 0.192753] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
[ 0.201779] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 0.208881] xenfs: not registering filesystem on non-xen platform
[ 0.273753] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.283580] console [ttyS0] disabled
[ 0.310217] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 42, base_baud = 1500000) is a U6_16550A
[ 1.066797] console [ttyS0] enabled
[ 1.099103] dw-apb-uart 1c29800.serial: Couldn't set LCR to 0
[ 1.112412] dw-apb-uart 1c29800.serial: Couldn't set LCR to 0
[ 1.124754] 1c29800.serial: ttyS6 at MMIO 0x1c29800 (irq = 43, base_baud = 1500000) is a U6_16550A
[ 1.162729] dw-apb-uart 1c29c00.serial: Couldn't set LCR to 0
[ 1.176261] dw-apb-uart 1c29c00.serial: Couldn't set LCR to 0
[ 1.188697] 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 44, base_baud = 1500000) is a U6_16550A
[ 1.206620] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
[ 1.223749] platform 1c50000.ethernet: Driver stmmaceth requests probe deferral
[ 1.238119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.251533] ehci-platform: EHCI generic platform driver
[ 1.263807] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[ 1.278136] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[ 1.292351] ehci-omap: OMAP-EHCI Host Controller driver
[ 1.304485] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.317503] ohci-platform: OHCI generic platform driver
[ 1.329585] platform 1c14400.usb: Driver ohci-platform requests probe deferral
[ 1.343672] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
[ 1.357605] ohci-omap3: OHCI OMAP3 driver
[ 1.368768] mousedev: PS/2 mouse device common for all mice
[ 1.382034] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[ 1.395483] sunxi-rtc 1c20d00.rtc: RTC enabled
[ 1.406566] i2c /dev entries driver
[ 1.418093] axp20x 0-0034: AXP20x variant AXP209 found
[ 1.432911] axp20x 0-0034: AXP20X driver loaded
[ 1.445989] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 1.460973] device-mapper: uevent: version 1.0.3
[ 1.472605] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 1.488404] device-mapper: multipath: version 1.7.0 loaded
[ 1.500712] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.514020] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 1.527316] device-mapper: multipath service-time: version 0.2.0 loaded
[ 1.540742] Driver 'mmcblk' needs updating - please use bus_type methods
[ 1.554682] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
[ 1.567293] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 1.616742] sunxi-mmc 1c0f000.mmc: base:0xf00b6000 irq:27
[ 1.629345] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.642022] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.654814] usbcore: registered new interface driver usbhid
[ 1.666994] usbhid: USB HID core driver
[ 1.678187] ipip: IPv4 over IPv4 tunneling driver
[ 1.690195] TCP: cubic registered
[ 1.700015] Initializing XFRM netlink socket
[ 1.711540] NET: Registered protocol family 10
[ 1.723767] sit: IPv6 over IPv4 tunneling driver
[ 1.735754] NET: Registered protocol family 17
[ 1.746643] NET: Registered protocol family 15
[ 1.757420] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.776675] 8021q: 802.1Q VLAN Support v1.8
[ 1.787449] Key type dns_resolver registered
[ 1.798267] Registering SWP/SWPB emulation handler
[ 1.816997] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.834016] mmc0: new high speed SDHC card at address 0001
[ 1.846705] mmcblk0: mmc0:0001 SD16G 14.6 GiB
[ 1.859376]  mmcblk0: p1 p2
[ 1.876606] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[ 1.890720] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled
[ 1.904327] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 1.919718] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc
[ 1.935625] scsi host0: ahci_platform
[ 1.946006] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 31
[ 2.066582] stmmaceth 1c50000.ethernet: no reset control found
[ 2.078949]  Ring mode enabled
[ 2.088484]  No HW DMA feature register supported
[ 2.093139]  Normal descriptors
[ 2.109136]  TX Checksum insertion supported
[ 2.124402] libphy: stmmac: probed
[ 2.134193] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 2.147003] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 2.159578] ehci-platform 1c14000.usb: EHCI Host Controller
[ 2.171559] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[ 2.185829] ehci-platform 1c14000.usb: irq 28, io mem 0x01c14000
[ 2.216510] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 2.229978] hub 1-0:1.0: USB hub found
[ 2.240110] hub 1-0:1.0: 1 port detected
[ 2.251121] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 2.263010] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[ 2.277140] ehci-platform 1c1c000.usb: irq 32, io mem 0x01c1c000
[ 2.306518] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 2.319734] hub 2-0:1.0: USB hub found
[ 2.326544] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.341178] hub 2-0:1.0: 1 port detected
[ 2.352999] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[ 2.365907] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[ 2.379983] ohci-platform 1c14400.usb: irq 29, io mem 0x01c14400
[ 2.452253] hub 3-0:1.0: USB hub found
[ 2.462321] hub 3-0:1.0: 1 port detected
[ 2.473206] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 2.486100] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[ 2.500208] ohci-platform 1c1c400.usb: irq 33, io mem 0x01c1c400
[ 2.571640] hub 4-0:1.0: USB hub found
[ 2.581668] hub 4-0:1.0: 1 port detected
[ 2.592223] sunxi-rtc 1c20d00.rtc: setting system clock to 2015-02-08 11:20:56 UTC (1423394456)
[ 2.611721] vcc5v0: disabling
[ 2.621106] vcc3v0: disabling
[ 2.631821] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[ 2.647462] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[ 2.831401] random: nonblocking pool is initialized
[ 2.974118] EXT4-fs (mmcblk0p2): recovery complete
[ 2.988938] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.003266] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 3.016945] devtmpfs: mounted
[ 3.026570] Freeing unused kernel memory: 508K (c0a2d000 - c0aac000)
[ 3.990542] udevd[182]: starting version 175
[ 6.655720] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 6.954100] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Raspbian GNU/Linux 7 raspberrypi ttyS0

raspberrypi login:
[  610.242577] reboot: Power down

sky-Hawk where · 发表于 2015-7-18 08:51:09

楼主那个转换器是在哪里买的呀，求分享~~

sky-Hawk where · 发表于 2015-7-18 22:47:01

天使♀的☆宇★翼发表于 2015-7-18 08:51
楼主那个转换器是在哪里买的呀，求分享~~

网上买的，HDMI转VGA，带供电口和音频口，不带供电口的好像不行，我不供电的话无显示

sky-Hawk where · 发表于 2015-7-19 23:03:37

写的好，学习和参考了

sky-Hawk where · 发表于 2015-7-20 18:21:58

多谢楼主分享~~~

香蕉派BPI-M1+ Raspbian系统安装，启动顺利！！！

站长推荐 /4