MPLAB ICD 3与Explorer 16开发工具包

GY@艳

MPLAB ICD 3 with Explorer 16 Kit是针对MicrochipPIC24、dsPIC和PIC32系列的一个完整应用开发套件。包括一个流行的Explorer 16开发板和两个可以更换的PIC24FJ128GA010 and dsPIC33FJ256GP710系列处理器插件模块。整个套件还包括一个MPLAB ICD 3调试器和9V的通用电源适配器。 The Explorer 16 Development Board is a low-cost modular development system for Microchip’s 16-bit and 32-bit microcontrollers. It supports devices from the PIC24, dsPIC and PIC32 families. A variety of families are supported with processor Plug-In Modules (PIMs) for easy device swapping. The board includes a PICtail Plus daughter card connector for expansion boards including USB, CAN, Ethernet, wireless, graphics and many more. Coupled with the MPLAB ICD 3 In Circuit Debugger or MPLAB REAL ICE, real-time emulation and debug facilities speed evaluation and prototyping of application circuitry. Getting Started

       

• Read the Explorer 16 User’s Manual (download section of this page)       
  
• Download the free MPLAB X IDE       
  
• Download the suitable MPLAB XC Compiler       
  
• Download and unzip the appropriate firmware demo code (download section of this page)
  

特性：

       

• 流行的Explorer 16开发板       
  
• 可更换的处理器插件模块       
  
• 包括MPLAB ICD 3 片上调试器
  

相关工具

       

• DV164035 MPLAB ICD 3 In-Circuit Debugger
  

Features

       

• Includes processor PIMs for both PIC24 and dsPIC families       
  
• Alpha-numeric 16 x 2 LCD display       
  
• Interfaces to MPLAB ICD 3, MPLAB REAL ICE and RS-232       
  
• Includes Microchip's TC1047A high accuracy, analog output temperature sensor       
  
• Expansion connector to access full devices pin-out and bread board prototyping area       
  
• PICTailTM Plus connector for expansion boards       
  
• Full documentation in download section below: user's guide, schematics