与非网论坛
标题: 低价出一个TFT触摸屏和zedboard配件 [打印本页]
作者: 稻爷的学徒 时间: 2015-1-11 17:32
标题: 低价出一个TFT触摸屏和zedboard配件
本帖最后由 稻爷的学徒 于 2015-1-11 17:37 编辑
15元出一个TFT触摸屏,功能完好,需要的联系QQ 2638823746
还有一个zedboard上面的 mpod模块,50块钱
The Digilent PmodHB3 2A H-Bridge Module (the HB3) is an ideal solution for robotics and other applications where logic signals are used to drive small to medium-sized DC motors.
The HB3 works with power supply voltages from 2.5V to 5V, but is normally operated at 3.3V as this is the supply voltage on most Digilent system boards.
The HB3 is designed to work with either Digilent programmable logic system boards or embedded control system boards. Most Digilent system boards, such as the Nexys, Basys, or Cerebot, have 6-pin connectors that allow the HB3 to plug directly into the system board or to connect via a Digilent 6-pin cable.
- 2A H-bridge circuit for voltages up to 12V
- Two 2-pin screw terminal blocks for connection to motor
- Small size (0.8" x 1.20")
- Ships with a 6" 6-pin cable and a 6-pin header
作者: zndz410 时间: 2015-1-12 09:14
帮顶一下。
作者: sky-Hawk where 时间: 2015-1-13 14:56
什么驱动IC……?
作者: 小鹏 时间: 2015-1-19 10:27
这个模块是干嘛用的?
作者: 稻爷的学徒 时间: 2015-1-19 16:41
小鹏 发表于 2015-1-19 10:27 
这个模块是干嘛用的?
zedboard的电机控制模块
欢迎光临 与非网论坛 (https://www.eefocus.com/forum/) |
Powered by Discuz! X3.5 |