The Nu-LB-Nano130 is an evaluation board for NUVOTON’s Cortex™-M0 based Nano100 seriesmicrocontrollers, and provides a complete development environment for Nano130 microcontrollers which has8/16K-byte internal SRAM and 32/64/128K-byte embedded flash, build-in 1.8V LDO, integratedLCD 4x40 dots, USB 2.0 full-speed port, RTC, 12-bit SAR ADC, 12-bit DAC, capacitive Touch-Key andprovide high performance connectivity peripheral interfaces such as UART, SPI, I2C, I2S, GPIOs, EBI(External Bus Interface) and ISO-7816-3 for Smart card. It supports Brown-Out Detector, power down modewith RAM retention and fast wake up via all peripheral interfaces.The Nu-LB-Nano130 learning board is similar to other development boards. Users can use it to develop andverify applications to emulate the real behavior. The on-board chip covers Nano130 series features. The Nu-LBNano130 can be a real system controller to design users’ target systems.This user manual provides information about hardware features and information about using this learning board.The following figure shows the Nu-LB-Nano130 board。
| 欢迎光临 与非网论坛 (https://www.eefocus.com/forum/) | Powered by Discuz! X3.5 |